Bully Boy’s range of automatic bollards includes 5, 6, and 8 inch diameter models.

All three sizes are available at heights of 450mm, 600mm and 750mm.

The surface finish is seamless 316 grade stainless steel.

The bollard caps and road surface collars are machined from either anodized aluminum or from 316 grade stainless steel

Control of the automatic bollards is based on a system controller which is placed in a secure panel, located near the bollards. The bollards’ operation can be controlled remotely, or by pin pad or swipe card, and can be integrated into an organisation’s access control system. The speed of elevation can be set by the administrator via the system controller.

The administrator can also manage sensitivity settings of the bollard system, such as “aggressive” to prevent tailgating, or “sensitive”such that if second vehicle nears the bollards as they are rising, it is detected by the in-ground loops and the bollards will lower to allow the vehicle to enter.

Safety is an important aspect for Bully Boy. The system can directly interface into a fire alarm, which can over-ride any setting of the bollards. So, if an alarm is activated, the bollards will retract to enable immediate vehicular access.